|
|
|
|
Application of Main Stainless Steel Grade
|
|
| |
Date:[8/13/2010] Source：Shandong Hai Steel Co.,Ltd
|
|
|
|
Application of Main Stainless Steel Grade
|
|
Application of Main Stainless Steel (1)
| Steel Grade |
Type |
Application |
| 1Cr18Ni9Ti |
Austenitic |
Widely used in food, chemical, pharmaceutical and unclear power industries. |
| 0Cr25Ni20 |
Austenitic |
Used as materials for furnace and exhaust gas cleaning systems of automobiles. |
| 1Cr18Ni9 |
Austenitic |
High strength after cold forming, used as decorative materials of buildings. |
| 0Cr18Ni9
0Cr19Ni9 |
Austenitic |
As a heat resisting stainless steel, widely used in manufacturing of equipment of food, general chemical and nuclear power industries. |
| 00Cr19Ni10 |
Austenitic |
Used to manufacture outdoor equipment, building materials, heat-resistant parts and parts that are difficult to make heat treatment for chemical, coal, petroleum industries that have high requirements for their intergranular corrosion resistant properties. |
| 0Cr17Ni12Mo2 |
Austenitic |
Suitable for offshore and other medium applications, mainly used as pit corrosion resistant material to produce equipment for photographic and food industries, and the installations, rope, CD rod, bolts and nuts along the sea coast. |
| 00Cr17Ni14Mo2 |
Austenitic |
Ultra-low carbon type of 0Cr17Ni12Mo2 steel, used to manufacture products which have special requirements for integranular corrosion resistant properties. |
| 0~1Cr18Ni12Mo2Ti |
Austenitic |
Excllent intergranular corrosion resistant properties, suitable to manufacture the equipment which resist to sulphuric acids, phosphonic acids, formic acids and acetic acids. |
| 0Cr18Ni10Ti |
Austenitic |
Its intergranular corrosion properties are enhanced by the addition of Ti. it is not recommended to use as decorative materials. |
| 0Cr16Ni14 |
Austenitic |
Nonmagnetic stainless steel, suitable to manufacture electronic parts. |
| 0Cr18Ni9Cu2 |
Austenitic |
|
Application of Main Stainless Steel(2)
| Steel Grade |
Type |
Application |
| 0-1Cr20Ni14Si2 |
Austenitic
|
Higher elevated temperature strength and excellent antioxidation properties, sensitive to atmosphere containing sulphur, has the tendency to phase precipitation brittleness between 600-800℃,Suitable to produce various furnace structures enduring stresses. |
| 0~1Cr17Ni7 |
Austenitic |
Suitable to produce high strength structural parts and use as the materials for railroad car. |
| 00Cr18Ni5Mo3Si2 |
Austenitic + ferritic |
Excellent stress corrosion fracture resistant properties, higher strength. Suitable to apply in oil refining, chemical fetilizer, pulp and paper, petroleum, chemical industries and produce heat exchangers and coolers, in which the environment contains chloride ions. |
| 0Cr17(Ti) |
Ferritic |
Suitable to manufacture the inner drum of washing machine and use as decorative materials |
| 00Cr12Ti |
Ferritic |
Suitable to produce silencers of automobiles and use as decorative materials |
| 0Cr13AI |
Ferritic |
No obvious hardening when cooling from high temperature, Suitable to use as the materials for gas turbine, hardened parts and composite steel products. |
| 1Cr17 |
Ferritic |
High quality general purpose steel, Suitable to use as materials for inner decoration of the buildings, produce parts for heavy oil burners and home appliance. |
| 0Cr13 |
Ferritic |
Suitable to produce parts needed higher toughness or enduring impact loads, such as blades of the gas turbine, structural frames, bolts and nuts. |
| 1Cr11MoV |
Martensitic |
|
| 1Cr13 |
Martensitic |
Excellent corrosion resistant, mechanical properties, Suitable to produce general purpose parts, cutting tools, mechanical parts, petroleum refining equipment, bolts and nuts, pump rods, and kitchenware, |
| 2Cr13 |
Martensitic |
High hardness under hardening conditions, excellent corrosion resistant properties, suitable to produce blades of the gas turbine, kitchen ware. |
| 3Cr13 |
Martensitic |
|
|
|
|
|
|
 |
|
|
