| product classification |
grade |
Angang standard |
foreign standard |
application |
| normal, mechanical welting |
DX51D+Z(St01Z、St01ZH、St02Z、St02ZH) |
Q/ASB 385-2004 |
EN10142
EN10147
(DIN17162) |
Making the mechanical welting products with the thickness≤1.5mm and the turning and rolling products with the thickness≤0.9mm |
| SGCC |
Q/ASB 387-2004 |
JISG3302 |
| drawing |
DX52D+Z(St03Z) |
Q/ASB 385-2004 |
EN10142
EN10147
(DIN17162) |
Making the extending, the drawing formed products and the turning and rewinding the products with the thickness>0.9mm |
| SGCD1 |
Q/ASB 387-2004 |
JISG3302 |
| deep drawing |
DX53D+Z
(St04Z、St05Z) |
Q/ASB 385-2004 |
EN10142
EN10147
(DIN17162) |
Making the deep extending products with high deforming property and the thicker products with the complicated form. The requirement is the surface is at the FC level and can't have the sliding and moving lines within 6 months. |
| SGCD2、SGCD3、SGCD3N |
Q/ASB 387-2004 |
JISG3302 |
| structural |
S220GD+Z(StE220Z)S250GD+Z(StE250Z)S280GD+Z(StE280Z)S320GD+Z(StE320Z) |
Q/ASB 385-2004 |
EN10142
EN10147
(DIN17162) |
Making the structural parts that require the sheet and strip have the special performance of the mechanics and the techniques. |
| SGC340、SGC400 |
Q/ASB 387-2004 |
JISG3302 |
| S350GD+Z(StE350Z) |
Q/ASB 385-2004 |
EN10142
EN10147
(DIN17162) |
Making the arch building after being painted. |
| SGC440 |
Q/ASB 387-2004 |
JISG3302 | | |
